The first step is to install TWRP (Team Win Recovery Project) custom recovery on your Xiaomi 12T. TWRP replaces the stock recovery and allows you to flash custom ROMs, GApps, and create complete system backups. You’ll need a PC/Mac with ADB and Fastboot tools installed, plus a USB cable. If TWRP is already installed on your Xiaomi 12T, skip directly to Step 2.

Download the Android 15 LineageOS 22 ROM zip and your preferred GApps package from the download section above. Connect your Xiaomi 12T to your computer via USB and transfer both .zip files to the device’s internal storage root folder or SD Card. Remember the file location — you’ll need to find these files in TWRP later.

Disconnect the USB cable and power off your Xiaomi 12T completely. Once the device is off, press and hold the Power button + Volume Up button simultaneously until you see the TWRP logo appear on screen. Release both buttons when TWRP loads. If prompted, swipe to allow modifications.

This step is critical for safety. In TWRP, tap Backup and create a complete Nandroid Backup. This creates a bit-for-bit copy of your entire current system — including the ROM, apps, data, and settings. If anything goes wrong during the Android 15 installation, or if you want to return to your previous ROM, you can restore this backup in minutes.

Detailed Nandroid Backup guide →

Now perform a thorough Factory Reset to prepare your Xiaomi 12T for the Android 15 ROM. In TWRP, navigate to Wipe → Advanced Wipe. Check the boxes for Cache, Dalvik Cache, System, and Data partitions. Then Swipe to Wipe. This completely clears the old system files, user data, and cache — preventing conflicts with the new Android 15 ROM.

After the wipe completes successfully, navigate back to the TWRP Main Menu by tapping the back arrow or pressing the home/center navigation button on your Xiaomi 12T. You should see the main TWRP screen with options like Install, Wipe, Backup, Restore, etc.

This is the main step. From the TWRP Main Menu, tap Install. Navigate to the folder where you saved the LineageOS 22 (Android 15) ROM zip file. Tap the file to select it, then Swipe to Confirm Flash. The flashing process takes 2–5 minutes — do not touch anything or power off your Xiaomi 12T until it completes. You’ll see “Successful” when done.

Immediately after the ROM flash completes, do not reboot yet. Instead, tap “Install” again (or use the back button), navigate to your GApps zip file, and flash it the same way. This installs the Google Play Store, Gmail, Google Maps, YouTube, and other essential Google services on your Xiaomi 12T. Without GApps, you won’t have access to Google services or the Play Store.

After the GApps flash completes, you’ll see a “Wipe cache/dalvik” button at the bottom left of the TWRP screen. Tap it and Swipe to Wipe. This clears any residual cached data and ensures a clean, error-free first boot of Android 15 on your Xiaomi 12T. Skipping this step can cause boot loops or app crashes.

After the cache wipe completes, Press the Home Button, Click Reboot button from the main menu, Tap on System and Swipe to Reboot. Your Xiaomi 12T will now boot into Android 15 (LineageOS 22) for the first time! Important: The first boot typically takes 5–10 minutes as the system optimizes all applications. The screen may appear stuck on the boot animation — this is completely normal. Do not force restart during this process.

The first step is to install TWRP (Team Win Recovery Project) custom recovery on your Xiaomi 12T. TWRP replaces the stock recovery and allows you to flash custom ROMs, GApps, and create complete system backups. You’ll need a PC/Mac with ADB and Fastboot tools installed, plus a USB cable. If TWRP is already installed on your Xiaomi 12T, skip directly to Step 2.

Download the Android 15 LineageOS 22 ROM zip and your preferred GApps package from the download section above. Connect your Xiaomi 12T to your computer via USB and transfer both .zip files to the device’s internal storage root folder or SD Card. Remember the file location — you’ll need to find these files in TWRP later.

Disconnect the USB cable and power off your Xiaomi 12T completely. Once the device is off, press and hold the Power button + Volume Up button simultaneously until you see the TWRP logo appear on screen. Release both buttons when TWRP loads. If prompted, swipe to allow modifications.

This step is critical for safety. In TWRP, tap Backup and create a complete Nandroid Backup. This creates a bit-for-bit copy of your entire current system — including the ROM, apps, data, and settings. If anything goes wrong during the Android 15 installation, or if you want to return to your previous ROM, you can restore this backup in minutes.

Detailed Nandroid Backup guide →

Now perform a thorough Factory Reset to prepare your Xiaomi 12T for the Android 15 ROM. In TWRP, navigate to Wipe → Advanced Wipe. Check the boxes for Cache, Dalvik Cache, System, and Data partitions. Then Swipe to Wipe. This completely clears the old system files, user data, and cache — preventing conflicts with the new Android 15 ROM.

After the wipe completes successfully, navigate back to the TWRP Main Menu by tapping the back arrow or pressing the home/center navigation button on your Xiaomi 12T. You should see the main TWRP screen with options like Install, Wipe, Backup, Restore, etc.

This is the main step. From the TWRP Main Menu, tap Install. Navigate to the folder where you saved the LineageOS 22 (Android 15) ROM zip file. Tap the file to select it, then Swipe to Confirm Flash. The flashing process takes 2–5 minutes — do not touch anything or power off your Xiaomi 12T until it completes. You’ll see “Successful” when done.

Immediately after the ROM flash completes, do not reboot yet. Instead, tap “Install” again (or use the back button), navigate to your GApps zip file, and flash it the same way. This installs the Google Play Store, Gmail, Google Maps, YouTube, and other essential Google services on your Xiaomi 12T. Without GApps, you won’t have access to Google services or the Play Store.

After the GApps flash completes, you’ll see a “Wipe cache/dalvik” button at the bottom left of the TWRP screen. Tap it and Swipe to Wipe. This clears any residual cached data and ensures a clean, error-free first boot of Android 15 on your Xiaomi 12T. Skipping this step can cause boot loops or app crashes.

After the cache wipe completes, Press the Home Button, Click Reboot button from the main menu, Tap on System and Swipe to Reboot. Your Xiaomi 12T will now boot into Android 15 (LineageOS 22) for the first time! Important: The first boot typically takes 5–10 minutes as the system optimizes all applications. The screen may appear stuck on the boot animation — this is completely normal. Do not force restart during this process.

The first step is to install TWRP (Team Win Recovery Project) custom recovery on your Xiaomi 12 Pro. TWRP replaces the stock recovery and allows you to flash custom ROMs, GApps, and create complete system backups. You’ll need a PC/Mac with ADB and Fastboot tools installed, plus a USB cable. If TWRP is already installed on your Xiaomi 12 Pro, skip directly to Step 2.

Download the Android 15 AOSP ROM ROM zip and your preferred GApps package from the download section above. Connect your Xiaomi 12 Pro to your computer via USB and transfer both .zip files to the device’s internal storage root folder or SD Card. Remember the file location — you’ll need to find these files in TWRP later.

Disconnect the USB cable and power off your Xiaomi 12 Pro completely. Once the device is off, press and hold the Power button + Volume Up button simultaneously until you see the TWRP logo appear on screen. Release both buttons when TWRP loads. If prompted, swipe to allow modifications.

This step is critical for safety. In TWRP, tap Backup and create a complete Nandroid Backup. This creates a bit-for-bit copy of your entire current system — including the ROM, apps, data, and settings. If anything goes wrong during the Android 15 installation, or if you want to return to your previous ROM, you can restore this backup in minutes.

Detailed Nandroid Backup guide →

Now perform a thorough Factory Reset to prepare your Xiaomi 12 Pro for the Android 15 ROM. In TWRP, navigate to Wipe → Advanced Wipe. Check the boxes for Cache, Dalvik Cache, System, and Data partitions. Then Swipe to Wipe. This completely clears the old system files, user data, and cache — preventing conflicts with the new Android 15 ROM.

After the wipe completes successfully, navigate back to the TWRP Main Menu by tapping the back arrow or pressing the home/center navigation button on your Xiaomi 12 Pro. You should see the main TWRP screen with options like Install, Wipe, Backup, Restore, etc.

This is the main step. From the TWRP Main Menu, tap Install. Navigate to the folder where you saved the AOSP ROM (Android 15) ROM zip file. Tap the file to select it, then Swipe to Confirm Flash. The flashing process takes 2–5 minutes — do not touch anything or power off your Xiaomi 12 Pro until it completes. You’ll see “Successful” when done.

Immediately after the ROM flash completes, do not reboot yet. Instead, tap “Install” again (or use the back button), navigate to your GApps zip file, and flash it the same way. This installs the Google Play Store, Gmail, Google Maps, YouTube, and other essential Google services on your Xiaomi 12 Pro. Without GApps, you won’t have access to Google services or the Play Store.

After the GApps flash completes, you’ll see a “Wipe cache/dalvik” button at the bottom left of the TWRP screen. Tap it and Swipe to Wipe. This clears any residual cached data and ensures a clean, error-free first boot of Android 15 on your Xiaomi 12 Pro. Skipping this step can cause boot loops or app crashes.

After the cache wipe completes, Press the Home Button, Click Reboot button from the main menu, Tap on System and Swipe to Reboot. Your Xiaomi 12 Pro will now boot into Android 15 (AOSP ROM) for the first time! Important: The first boot typically takes 5–10 minutes as the system optimizes all applications. The screen may appear stuck on the boot animation — this is completely normal. Do not force restart during this process.

The first step is to install TWRP (Team Win Recovery Project) custom recovery on your Realme 10 Pro 5G. TWRP replaces the stock recovery and allows you to flash custom ROMs, GApps, and create complete system backups. You’ll need a PC/Mac with ADB and Fastboot tools installed, plus a USB cable. If TWRP is already installed on your Realme 10 Pro 5G, skip directly to Step 2.

Download the Android 15 LineageOS 22 ROM zip and your preferred GApps package from the download section above. Connect your Realme 10 Pro 5G to your computer via USB and transfer both .zip files to the device’s internal storage root folder or SD Card. Remember the file location — you’ll need to find these files in TWRP later.

Disconnect the USB cable and power off your Realme 10 Pro 5G completely. Once the device is off, press and hold the Power button + Volume Up button simultaneously until you see the TWRP logo appear on screen. Release both buttons when TWRP loads. If prompted, swipe to allow modifications.

This step is critical for safety. In TWRP, tap Backup and create a complete Nandroid Backup. This creates a bit-for-bit copy of your entire current system — including the ROM, apps, data, and settings. If anything goes wrong during the Android 15 installation, or if you want to return to your previous ROM, you can restore this backup in minutes.

Detailed Nandroid Backup guide →

Now perform a thorough Factory Reset to prepare your Realme 10 Pro 5G for the Android 15 ROM. In TWRP, navigate to Wipe → Advanced Wipe. Check the boxes for Cache, Dalvik Cache, System, and Data partitions. Then Swipe to Wipe. This completely clears the old system files, user data, and cache — preventing conflicts with the new Android 15 ROM.

After the wipe completes successfully, navigate back to the TWRP Main Menu by tapping the back arrow or pressing the home/center navigation button on your Realme 10 Pro 5G. You should see the main TWRP screen with options like Install, Wipe, Backup, Restore, etc.

This is the main step. From the TWRP Main Menu, tap Install. Navigate to the folder where you saved the LineageOS 22 (Android 15) ROM zip file. Tap the file to select it, then Swipe to Confirm Flash. The flashing process takes 2–5 minutes — do not touch anything or power off your Realme 10 Pro 5G until it completes. You’ll see “Successful” when done.

Immediately after the ROM flash completes, do not reboot yet. Instead, tap “Install” again (or use the back button), navigate to your GApps zip file, and flash it the same way. This installs the Google Play Store, Gmail, Google Maps, YouTube, and other essential Google services on your Realme 10 Pro 5G. Without GApps, you won’t have access to Google services or the Play Store.

After the GApps flash completes, you’ll see a “Wipe cache/dalvik” button at the bottom left of the TWRP screen. Tap it and Swipe to Wipe. This clears any residual cached data and ensures a clean, error-free first boot of Android 15 on your Realme 10 Pro 5G. Skipping this step can cause boot loops or app crashes.

After the cache wipe completes, Press the Home Button, Click Reboot button from the main menu, Tap on System and Swipe to Reboot. Your Realme 10 Pro 5G will now boot into Android 15 (LineageOS 22) for the first time! Important: The first boot typically takes 5–10 minutes as the system optimizes all applications. The screen may appear stuck on the boot animation — this is completely normal. Do not force restart during this process.

The first step is to install TWRP (Team Win Recovery Project) custom recovery on your Motorola Moto G200 5G & Edge S30. TWRP replaces the stock recovery and allows you to flash custom ROMs, GApps, and create complete system backups. You’ll need a PC/Mac with ADB and Fastboot tools installed, plus a USB cable. If TWRP is already installed on your Motorola Moto G200 5G & Edge S30, skip directly to Step 2.

Download the Android 16 LineageOS 23 ROM zip and your preferred GApps package from the download section above. Connect your Motorola Moto G200 5G & Edge S30 to your computer via USB and transfer both .zip files to the device’s internal storage root folder or SD Card. Remember the file location — you’ll need to find these files in TWRP later.

Disconnect the USB cable and power off your Motorola Moto G200 5G & Edge S30 completely. Once the device is off, press and hold the Power button + Volume Up button simultaneously until you see the TWRP logo appear on screen. Release both buttons when TWRP loads. If prompted, swipe to allow modifications.

This step is critical for safety. In TWRP, tap Backup and create a complete Nandroid Backup. This creates a bit-for-bit copy of your entire current system — including the ROM, apps, data, and settings. If anything goes wrong during the Android 16 installation, or if you want to return to your previous ROM, you can restore this backup in minutes.

Detailed Nandroid Backup guide →

Now perform a thorough Factory Reset to prepare your Motorola Moto G200 5G & Edge S30 for the Android 16 ROM. In TWRP, navigate to Wipe → Advanced Wipe. Check the boxes for Cache, Dalvik Cache, System, and Data partitions. Then Swipe to Wipe. This completely clears the old system files, user data, and cache — preventing conflicts with the new Android 16 ROM.

After the wipe completes successfully, navigate back to the TWRP Main Menu by tapping the back arrow or pressing the home/center navigation button on your Motorola Moto G200 5G & Edge S30. You should see the main TWRP screen with options like Install, Wipe, Backup, Restore, etc.

This is the main step. From the TWRP Main Menu, tap Install. Navigate to the folder where you saved the LineageOS 23 (Android 16) ROM zip file. Tap the file to select it, then Swipe to Confirm Flash. The flashing process takes 2–5 minutes — do not touch anything or power off your Motorola Moto G200 5G & Edge S30 until it completes. You’ll see “Successful” when done.

Immediately after the ROM flash completes, do not reboot yet. Instead, tap “Install” again (or use the back button), navigate to your GApps zip file, and flash it the same way. This installs the Google Play Store, Gmail, Google Maps, YouTube, and other essential Google services on your Motorola Moto G200 5G & Edge S30. Without GApps, you won’t have access to Google services or the Play Store.

After the GApps flash completes, you’ll see a “Wipe cache/dalvik” button at the bottom left of the TWRP screen. Tap it and Swipe to Wipe. This clears any residual cached data and ensures a clean, error-free first boot of Android 16 on your Motorola Moto G200 5G & Edge S30. Skipping this step can cause boot loops or app crashes.

After the cache wipe completes, Press the Home Button, Click Reboot button from the main menu, Tap on System and Swipe to Reboot. Your Motorola Moto G200 5G & Edge S30 will now boot into Android 16 (LineageOS 23) for the first time! Important: The first boot typically takes 5–10 minutes as the system optimizes all applications. The screen may appear stuck on the boot animation — this is completely normal. Do not force restart during this process.

The first step is to install TWRP (Team Win Recovery Project) custom recovery on your Motorola Moto G42. TWRP replaces the stock recovery and allows you to flash custom ROMs, GApps, and create complete system backups. You’ll need a PC/Mac with ADB and Fastboot tools installed, plus a USB cable. If TWRP is already installed on your Motorola Moto G42, skip directly to Step 2.

Download the Android 15 AOSP ROM ROM zip and your preferred GApps package from the download section above. Connect your Motorola Moto G42 to your computer via USB and transfer both .zip files to the device’s internal storage root folder or SD Card. Remember the file location — you’ll need to find these files in TWRP later.

Disconnect the USB cable and power off your Motorola Moto G42 completely. Once the device is off, press and hold the Power button + Volume Up button simultaneously until you see the TWRP logo appear on screen. Release both buttons when TWRP loads. If prompted, swipe to allow modifications.

This step is critical for safety. In TWRP, tap Backup and create a complete Nandroid Backup. This creates a bit-for-bit copy of your entire current system — including the ROM, apps, data, and settings. If anything goes wrong during the Android 15 installation, or if you want to return to your previous ROM, you can restore this backup in minutes.

Detailed Nandroid Backup guide →

Now perform a thorough Factory Reset to prepare your Motorola Moto G42 for the Android 15 ROM. In TWRP, navigate to Wipe → Advanced Wipe. Check the boxes for Cache, Dalvik Cache, System, and Data partitions. Then Swipe to Wipe. This completely clears the old system files, user data, and cache — preventing conflicts with the new Android 15 ROM.

After the wipe completes successfully, navigate back to the TWRP Main Menu by tapping the back arrow or pressing the home/center navigation button on your Motorola Moto G42. You should see the main TWRP screen with options like Install, Wipe, Backup, Restore, etc.

This is the main step. From the TWRP Main Menu, tap Install. Navigate to the folder where you saved the AOSP ROM (Android 15) ROM zip file. Tap the file to select it, then Swipe to Confirm Flash. The flashing process takes 2–5 minutes — do not touch anything or power off your Motorola Moto G42 until it completes. You’ll see “Successful” when done.

Immediately after the ROM flash completes, do not reboot yet. Instead, tap “Install” again (or use the back button), navigate to your GApps zip file, and flash it the same way. This installs the Google Play Store, Gmail, Google Maps, YouTube, and other essential Google services on your Motorola Moto G42. Without GApps, you won’t have access to Google services or the Play Store.

After the GApps flash completes, you’ll see a “Wipe cache/dalvik” button at the bottom left of the TWRP screen. Tap it and Swipe to Wipe. This clears any residual cached data and ensures a clean, error-free first boot of Android 15 on your Motorola Moto G42. Skipping this step can cause boot loops or app crashes.

After the cache wipe completes, Press the Home Button, Click Reboot button from the main menu, Tap on System and Swipe to Reboot. Your Motorola Moto G42 will now boot into Android 15 (AOSP ROM) for the first time! Important: The first boot typically takes 5–10 minutes as the system optimizes all applications. The screen may appear stuck on the boot animation — this is completely normal. Do not force restart during this process.

The first step is to install TWRP (Team Win Recovery Project) custom recovery on your Poco X3 NFC. TWRP replaces the stock recovery and allows you to flash custom ROMs, GApps, and create complete system backups. You’ll need a PC/Mac with ADB and Fastboot tools installed, plus a USB cable. If TWRP is already installed on your Poco X3 NFC, skip directly to Step 2.

Download the Android 15 Pixel Experience Rom ROM zip and your preferred GApps package from the download section above. Connect your Poco X3 NFC to your computer via USB and transfer both .zip files to the device’s internal storage root folder or SD Card. Remember the file location — you’ll need to find these files in TWRP later.

Disconnect the USB cable and power off your Poco X3 NFC completely. Once the device is off, press and hold the Power button + Volume Up button simultaneously until you see the TWRP logo appear on screen. Release both buttons when TWRP loads. If prompted, swipe to allow modifications.

This step is critical for safety. In TWRP, tap Backup and create a complete Nandroid Backup. This creates a bit-for-bit copy of your entire current system — including the ROM, apps, data, and settings. If anything goes wrong during the Android 15 installation, or if you want to return to your previous ROM, you can restore this backup in minutes.

Detailed Nandroid Backup guide →

Now perform a thorough Factory Reset to prepare your Poco X3 NFC for the Android 15 ROM. In TWRP, navigate to Wipe → Advanced Wipe. Check the boxes for Cache, Dalvik Cache, System, and Data partitions. Then Swipe to Wipe. This completely clears the old system files, user data, and cache — preventing conflicts with the new Android 15 ROM.

After the wipe completes successfully, navigate back to the TWRP Main Menu by tapping the back arrow or pressing the home/center navigation button on your Poco X3 NFC. You should see the main TWRP screen with options like Install, Wipe, Backup, Restore, etc.

This is the main step. From the TWRP Main Menu, tap Install. Navigate to the folder where you saved the Pixel Experience Rom (Android 15) ROM zip file. Tap the file to select it, then Swipe to Confirm Flash. The flashing process takes 2–5 minutes — do not touch anything or power off your Poco X3 NFC until it completes. You’ll see “Successful” when done.

Immediately after the ROM flash completes, do not reboot yet. Instead, tap “Install” again (or use the back button), navigate to your GApps zip file, and flash it the same way. This installs the Google Play Store, Gmail, Google Maps, YouTube, and other essential Google services on your Poco X3 NFC. Without GApps, you won’t have access to Google services or the Play Store.

After the GApps flash completes, you’ll see a “Wipe cache/dalvik” button at the bottom left of the TWRP screen. Tap it and Swipe to Wipe. This clears any residual cached data and ensures a clean, error-free first boot of Android 15 on your Poco X3 NFC. Skipping this step can cause boot loops or app crashes.

After the cache wipe completes, Press the Home Button, Click Reboot button from the main menu, Tap on System and Swipe to Reboot. Your Poco X3 NFC will now boot into Android 15 (Pixel Experience Rom) for the first time! Important: The first boot typically takes 5–10 minutes as the system optimizes all applications. The screen may appear stuck on the boot animation — this is completely normal. Do not force restart during this process.

The first step is to install TWRP (Team Win Recovery Project) custom recovery on your Asus Zenfone 5Z. TWRP replaces the stock recovery and allows you to flash custom ROMs, GApps, and create complete system backups. You’ll need a PC/Mac with ADB and Fastboot tools installed, plus a USB cable. If TWRP is already installed on your Asus Zenfone 5Z, skip directly to Step 2.

Download the Android 16 LineageOS 23 ROM zip and your preferred GApps package from the download section above. Connect your Asus Zenfone 5Z to your computer via USB and transfer both .zip files to the device’s internal storage root folder or SD Card. Remember the file location — you’ll need to find these files in TWRP later.

Disconnect the USB cable and power off your Asus Zenfone 5Z completely. Once the device is off, press and hold the Power button + Volume Up button simultaneously until you see the TWRP logo appear on screen. Release both buttons when TWRP loads. If prompted, swipe to allow modifications.

This step is critical for safety. In TWRP, tap Backup and create a complete Nandroid Backup. This creates a bit-for-bit copy of your entire current system — including the ROM, apps, data, and settings. If anything goes wrong during the Android 16 installation, or if you want to return to your previous ROM, you can restore this backup in minutes.

Detailed Nandroid Backup guide →

Now perform a thorough Factory Reset to prepare your Asus Zenfone 5Z for the Android 16 ROM. In TWRP, navigate to Wipe → Advanced Wipe. Check the boxes for Cache, Dalvik Cache, System, and Data partitions. Then Swipe to Wipe. This completely clears the old system files, user data, and cache — preventing conflicts with the new Android 16 ROM.

After the wipe completes successfully, navigate back to the TWRP Main Menu by tapping the back arrow or pressing the home/center navigation button on your Asus Zenfone 5Z. You should see the main TWRP screen with options like Install, Wipe, Backup, Restore, etc.

This is the main step. From the TWRP Main Menu, tap Install. Navigate to the folder where you saved the LineageOS 23 (Android 16) ROM zip file. Tap the file to select it, then Swipe to Confirm Flash. The flashing process takes 2–5 minutes — do not touch anything or power off your Asus Zenfone 5Z until it completes. You’ll see “Successful” when done.

Immediately after the ROM flash completes, do not reboot yet. Instead, tap “Install” again (or use the back button), navigate to your GApps zip file, and flash it the same way. This installs the Google Play Store, Gmail, Google Maps, YouTube, and other essential Google services on your Asus Zenfone 5Z. Without GApps, you won’t have access to Google services or the Play Store.

After the GApps flash completes, you’ll see a “Wipe cache/dalvik” button at the bottom left of the TWRP screen. Tap it and Swipe to Wipe. This clears any residual cached data and ensures a clean, error-free first boot of Android 16 on your Asus Zenfone 5Z. Skipping this step can cause boot loops or app crashes.

After the cache wipe completes, Press the Home Button, Click Reboot button from the main menu, Tap on System and Swipe to Reboot. Your Asus Zenfone 5Z will now boot into Android 16 (LineageOS 23) for the first time! Important: The first boot typically takes 5–10 minutes as the system optimizes all applications. The screen may appear stuck on the boot animation — this is completely normal. Do not force restart during this process.