1. First, power off your smartphone by holding the Power key.

2. Next, press and hold both the Volume Up and Power buttons simultaneously.

3. Release the Power button once you see the REDMI logo on the screen.

4. Navigate to Wipe Data and then select Wipe All Data. Use the Volume rocker to scroll and the Power key to select.

5. Confirm your selection by choosing Confirm to begin the process.

6. Afterward, go back to the main menu and choose Reboot.

7. Finally, select Reboot to System to restart your REDMI A4.

8. Mission complete! Keep in mind that this procedure will erase all your files.

[the_ad id=”6712″]

Redmi A4 5G Specification:

The phone comes with a 120 Hz refresh rate 6.88-inch touchscreen display offering a resolution of 720×1640 pixels (HD+). Redmi A4 5G is powered by an octa-core Qualcomm Snapdragon 4s Gen 2 processor. It comes with 4GB of RAM. The Redmi A4 5G runs Android 14 and is powered by a 5160mAh non-removable battery.

As far as the cameras are concerned, the Redmi A4 5G on the rear packs a 50-megapixel camera with an f/1.8 aperture. It has a single front camera setup for selfies, featuring a 5-megapixel sensor with an f/2.2 aperture.

1. First of all, install the iTunes program on your computer, which will be connected with the iPhone 16.

2. After that, open iTunes application and choose your device.

3. Here, select the Restore iPhone… option.

4. Now you have to decide if you want to back up your data or not.

5. In the last step, choose the Restore procedure.

6. Well done!

[the_ad id=”6712″]

iPhone 16 Specification:

The phone comes with a 60 Hz refresh rate 6.10-inch touchscreen display offering a resolution of 1179×2556 pixels at a pixel density of 460 pixels per inch (ppi). iPhone 16 is powered by a hexa-core Apple A18 processor. It comes with 8GB of RAM. The iPhone 16 supports wireless charging.

As far as the cameras are concerned, the iPhone 16 on the rear packs a dual camera setup featuring a 48-megapixel (f/1.6) primary camera, and a 12-megapixel (f/2.2, ultra wide-angle) camera. It has a single front camera setup for selfies, featuring a 12-megapixel sensor with an f/1.9 aperture.

1. Start by turning off your device by pressing the Power key.

2. Then, press and hold both the Power button and the Volume Down button.

3. When you’re in Fastboot mode, use the Volume rocker to navigate and press the Power key to select. From there, choose the Recovery Mode option.

4. If you see the No command image, press both the Power key and the Volume Up key together to bypass it.

5. Scroll using the Volume rocker to select Wipe data/factory reset, then confirm by pressing the Power key.

6. Choose Factory data reset to confirm and proceed with the reset.

7. Once the reset is complete, select Reboot system now to restart your ITEL Color Pro.

8. Great job!

[the_ad id=”6712″]

Itel Color Pro Specification:

The phone comes with a 90 Hz refresh rate 6.60-inch touchscreen display offering a resolution of 1620×720 pixels (HD+) at a pixel density of 267 pixels per inch (ppi). Itel Color Pro 5G is powered by an octa-core MediaTek Dimensity 6080 processor. It comes with 4GB, 6GB of RAM. The Itel Color Pro 5G runs Android 13 (Go Edition) and is powered by a 5000mAh battery. The Itel Color Pro 5G supports proprietary fast charging.

As far as the cameras are concerned, the Itel Color Pro 5G on the rear packs a dual camera setup featuring a 50-megapixel primary camera, and a 2-megapixel camera. It has a single front camera setup for selfies, featuring an 8-megapixel sensor.

1. To initiate the process, power off your HONOR X60i using the Power button.

2. Connect your mobile phone to the computer using a USB cable and simultaneously press the Power + Volume Up keys until the HONOR logo appears.

3. The Recovery Mode should now be visible on the screen.

4. Here, use the Volume Rocker to navigate to the “Clear data” option and confirm this with the Power button.

5. Choose the Factory Reset procedure and input “Yes”, then confirm by tapping the Factory reset position.

6. Finally, use the Back button and select the Restart function to power on your device.

[the_ad id=”6712″]

Honor X60i Specification:

The phone comes with a 90 Hz refresh rate 6.70-inch touchscreen display offering a resolution of 1080×2412 pixels (FHD+).Honor X60i comes with 8GB of RAM. The Honor X60i runs Android 14 and is powered by a 5000mAh battery. The Honor X60i supports 35W Fast Charging fast charging.

As far as the cameras are concerned, the Honor X60i on the rear packs a 50-megapixel primary camera, and a 2-megapixel camera. It has a single front camera setup for selfies, featuring an 8-megapixel sensor.

1. First, turn off the REALME Narzo N61 using the Power button.

2. Next, press and hold both the Power button and the Volume Down button simultaneously.

3. When the language menu appears, select English.

4. Then navigate to the Wipe data section.

5. Enter the verification code that appears to proceed.

6. Select the Format data option and tap on Format to start the process.

7. Once the process is complete, press OK on the screen.

8. Finally, reboot your device using the Reboot option.

9. Good job!

[the_ad id=”6712″]

Realme Narzo N61 Specification:

The phone comes with a 90 Hz refresh rate 6.74-inch touchscreen display offering a resolution of 720×1600 pixels (HD+). It comes with 4GB, 6GB of RAM. The Realme Narzo N61 runs Android 14 and is powered by a 5000mAh battery. The Realme Narzo N61 supports proprietary fast charging.

As far as the cameras are concerned, the Realme Narzo N61 on the rear packs 32-megapixel camera. It has a single front camera setup for selfies, featuring a 5-megapixel sensor.

1. First, turn off your LAVA Blaze 3 5G by pressing the Power button.

2. Next, press and hold both the Volume Up and Power button simultaneously.

3. Once Recovery mode appears, use the Volume rocker to navigate and press the Power button to select an option.

4. Now, select the Wipe data/factory reset option.

5. Confirm the Factory data reset by selecting that option.

6. Finally, select the Reboot system now option to restart your device.

7. Well done, you’re finished!

[the_ad id=”6712″]

Lava Blaze 3 Specification:

The phone comes with a 90 Hz refresh rate 6.50-inch touchscreen display offering a resolution of 1600×720 pixels (HD+) at a pixel density of 269 pixels per inch (ppi). It comes with 6GB of RAM. The Lava Blaze 3 5G runs Android 14 and is powered by a 5000mAh removable battery.

As far as the cameras are concerned, the Lava Blaze 3 5G on the rear packs a dual camera setup featuring a 50-megapixel primary camera, and a 2-megapixel camera. It has a single front camera setup for selfies, featuring an 8-megapixel sensor.

1. Turn off your VIVO S20 by holding the Power button.

2. Press and hold the Power and Volume Up buttons simultaneously.

3. When Fastboot Mode appears, navigate using the Volume Up button and confirm with the Power key.

4. Select the Recovery Mode option from the menu.

5. In Recovery Mode, tap Clear Data and choose Clear All Data.

6. Tap OK to confirm, entering your password if required.

7. Once the reset is complete, use Return to navigate back to the main Recovery Mode menu.

8. Finally, select Restart to turn your VIVO S20 back on.

9. The Hard Reset is now complete. Well done!

[the_ad id=”6712″]

Vivo S20 & S20 Pro Specification:

Both models in the Vivo S20 series are equipped with a 6.67-inch (1260 x 2800 pixels) 1.5K AMOLED screen with a 120Hz refresh rate, peak brightness of 5,000 nits, and HDR10+ support. The base model gets a flat display while the Pro variant comes with a quad-curved panel. Both handsets run on OriginOS 5 based on Android 15.

The Vivo S20 is powered by Qualcomm’s Snapdragon 7 Gen 3 processor, paired with up to 16GB of LPDDR4X RAM and up to 512GB of UFS 2.2 storage. On the other hand, the Vivo S20 Pro gets a MediaTek Dimensity 9300+ SoC under the hood, which is paired with Arm’s Immortalis-G720 GPU, up to 16GB of LPDDR5X RAM, and up to 512GB of UFS 3.1 storage.

1. To shut down your device, simultaneously press and hold the Power button and the Volume Up button.

2. Next, press and hold the Volume Down, Volume Up, and Power buttons at the same time.

3. Once you feel a vibration from the NOTHING Phone (2a) Plus, release the Power and Volume Down buttons, but continue to hold the Volume Up button.

4. If the display shows “No command,” press the Volume Up button while still holding down the Power button.

5. You will now be in Recovery Mode.

6. Use the Volume Rocker to highlight “Wipe data/factory reset”, then press the Power button to confirm your selection.

7. Select “Factory data reset” to begin the reset process.

8. After the reset is complete, choose “Reboot system now” to restart your device.

[the_ad id=”6712″]

Phone 2a Plus Specification:

The device offers the same Glyph interface, which is interesting to use and offers a transparent back panel for a unique design element. The handset also has an updated processor that performs well at this price segment. The Nothing Phone 2a Plus also brings a clean user interface that definitely stands out from the rest of the competition. The camera capabilities are good, and you also get some good battery life. That said, the cameras offer better performance as compared to the Nothing Phone 2a, but it still needs some improvements. So, if you are looking for a mid-range Nothing phone with some improvements, you can consider Nothing Phone 2a Plus.

1. To power off the device, press the Power key.

2. Simultaneously press and hold the Power button along with the Volume Up button.

3. Release all buttons when the No command screen appears.

4. To get past the No command logo, keep holding the Power button while you press the Volume Up button.

5. You will now enter Recovery mode.

6. Well done! Use the Volume rocker to scroll through the options, and press the Power key to make your selection.

7. Select the Wipe data/factory reset option from the menu.

8. Excellent!

 

[the_ad id=”6712″]

Xiaomi 14 Flip & Xiaomi Mix Flip Specification:

The phone comes with a 120 Hz refresh rate 6.86-inch touchscreen primary display offering a resolution of 2912×1224 pixels (1.5K). It also features a 4.01-inch touchscreen as its second display, with a resolution of 1392×1280 pixels.Xiaomi Mix Flip comes with 12GB of RAM. The Xiaomi Mix Flip runs Android 14 and is powered by a 4780mAh battery. The Xiaomi Mix Flip supports 67W Turbo Charge fast charging.

As far as the cameras are concerned, the Xiaomi Mix Flip on the rear packs a dual camera setup featuring a 50-megapixel primary camera, and a 50-megapixel camera. It has a single front camera setup for selfies, featuring a 32-megapixel sensor.

1. At first, hold down the Power button for a few moments.

2. When devcie is shut down, push the Volume Up + Power key together for a couple of seconds.

3. Release hel keys when Recovery Mode pops up.

4. Here, go to Wipe Data and Wipe All Data. Use Volume keys to navigate and the Power button to confirm that.

5. Next, choose Confirm and wait until the process ends.

6. After that, go back to Main Menu and pick Reboot.

7. At last, select Reboot to System with the Power key.

8. Excellent!

[the_ad id=”6712″]

Xiaomi 14 Flip & Xiaomi Mix Flip Specification:

The phone comes with a 120 Hz refresh rate 6.86-inch touchscreen primary display offering a resolution of 2912×1224 pixels (1.5K). It also features a 4.01-inch touchscreen as its second display, with a resolution of 1392×1280 pixels.Xiaomi Mix Flip comes with 12GB of RAM. The Xiaomi Mix Flip runs Android 14 and is powered by a 4780mAh battery. The Xiaomi Mix Flip supports 67W Turbo Charge fast charging.

As far as the cameras are concerned, the Xiaomi Mix Flip on the rear packs a dual camera setup featuring a 50-megapixel primary camera, and a 50-megapixel camera. It has a single front camera setup for selfies, featuring a 32-megapixel sensor.