Install Android 16 on Mi Pad 4 (LineageOS 23) – How to Guide!

by

Want to install Android 16 on your Xiaomi Mi Pad 4? You are in the right place. This comprehensive, step-by-step guide walks you through the complete process of flashing the unofficial LineageOS 23 custom ROM on the Xiaomi Mi Pad 4 (codename: clover).

Even though Xiaomi has ended official software support for the Mi Pad 4 (which shipped with Android 8.1 Oreo and received Android 8.1 as its final official update), you can breathe new life into this Snapdragon 660-powered device with Android 16. This custom ROM delivers the latest Android features, improved performance, better battery optimization, enhanced privacy controls, and a clean AOSP stock Android experience.

smartphone

Why Install Android 16 on Mi Pad 4?

The Xiaomi Mi Pad 4 (released June 2018) was a popular mid-range tablet powered by the Qualcomm Snapdragon 660 processor with up to 4GB RAM and a sharp 8.0 inch IPS LCD display. Despite being a capable device, Xiaomi ended official software support at Android 8.1 (MIUI 10), leaving users stuck on outdated software with potential security vulnerabilities.

Installing Android 16 via LineageOS 23 gives your Mi Pad 4 a second life with:

security
Latest Security Patches
Protection against current known vulnerabilities and exploits.
speed
Better Performance
AOSP-based ROMs are usually leaner and faster than stock firmware.
battery_full
Extended Battery Life
Android 16 power optimizations can improve battery efficiency.
apps
Modern App Support
Run newer apps that require recent Android API levels.
auto_awesome

Android 16 Key Features You'll Get on Mi Pad 4

Android 16 on Mi Pad 4 with LineageOS 23 delivers a modern Android experience. Android 16 continues the push toward smoother performance, stronger privacy, and better device longevity. Key highlights include:

memory

Better Resource Management

Improved memory and process scheduling can keep multitasking smoother on older devices.
bolt

System Responsiveness

Latency reductions across common UI actions make navigation feel faster and cleaner.
security

Next-Gen Security

Updated platform protections reduce attack surface and tighten app-level boundaries.
tune

Smarter Performance Tuning

More adaptive runtime behavior for mixed workloads, gaming sessions, and thermal balance.
apps

Modern App Compatibility

Improved support for newer app expectations and platform APIs.
verified

Stability Refinements

Broader framework refinements for fewer crashes and more consistent daily use.
warning

Important Warnings — Read Before Installing Android 16

error

Device-specific ROM: This Android 16 custom ROM is ONLY for the Mi Pad 4. Do not flash it on any other device — it will brick your device.

error

Brick risk: Carefully follow every step in the correct order. Incorrect installation — such as flashing the wrong file, interrupting the process, or skipping the wipe — can permanently brick your Mi Pad 4. TheUpgradeGuide is not responsible for any damage.

error

Complete data wipe: Installing this custom ROM erases everything on your Mi Pad 4 — apps, photos, contacts, messages, and files. Create a complete backup before proceeding.

error

Battery requirement: Charge your Mi Pad 4 to at least 50–60% before starting. An accidental shutdown during the flashing process can leave your device in a non-bootable state.

error

Warranty void: Unlocking the bootloader and installing a custom ROM will void your manufacturer warranty.

checklist

Pre-Installation Requirements for Mi Pad 4

Make sure you have all of the following ready before starting the Android 16 installation on your Mi Pad 4:

check_circle

Unlocked bootloader: Your Mi Pad 4 must have an unlocked bootloader. Use Xiaomi’s official Mi Unlock Tool if you haven’t done this. The process requires linking your Mi account and waiting approximately 7 days.

check_circle

TWRP Recovery installed: You must have TWRP Recovery installed on your Mi Pad 4. Watch TWRP installation tutorial for Mi Pad 4 →

check_circle

Full data backup: Back up all important data — photos, contacts, messages, app data, WhatsApp chats, and files — before starting the installation. Consider using Google Backup and Google Photos for cloud backup.

check_circle

USB drivers installed: Install the appropriate USB drivers on your PC/Mac. These are needed if you’re using ADB/Fastboot for any part of the process.

forum

XDA Forum Thread: LineageOS 23 for Mi Pad 4 — XDA Forum →

Always check this XDA Forum thread for the latest build updates, known bugs, required patches, firmware requirements, and community feedback before installing.

download

Download Android 16 ROM & GApps for Mi Pad 4

LineageOS 23 ROM (AOSP-Based Android 16) for Mi Pad 4

Google Apps (GApps) for Android 16 ARM64 – Choose One Package

apps LiteGApps (Android 16 ARM64)apps NikGApps (Android 16 ARM64)apps MindTheGApps (Android 16 ARM64)apps BiTGapps (Android 16 ARM64)

search Not sure which GApps to pick? Read our complete GApps compatibility guide ->

bolt Quick Installation Overview

Short on time? Here’s the 5-step summary of how to install Android 16 on your Mi Pad 4. Scroll down for the detailed guide with screenshots.

  1. 1Download the LineageOS 23 Android 16 ROM & GApps for Mi Pad 4.
  2. 2Boot your Mi Pad 4 into TWRP custom recovery mode.
  3. 3Wipe system, vendor, data, cache, and dalvik cache partitions.
  4. 4Flash the Android 16 ROM zip followed by the GApps zip via TWRP Install.
  5. 5Wipe cache, reboot, and enjoy Android 16 on your Mi Pad 4!
menu_book

Step-by-Step: Install Android 16 on Mi Pad 4

1

install_mobile Install TWRP Custom Recovery on Mi Pad 4

The first step is to install TWRP (Team Win Recovery Project) custom recovery on your Mi Pad 4. TWRP replaces the stock recovery and allows you to flash custom ROMs, GApps, and create complete system backups. You’ll need a PC/Mac with ADB and Fastboot tools installed, plus a USB cable. If TWRP is already installed on your Mi Pad 4, skip directly to Step 2.

2

file_copy Transfer the ROM and GApps Files to Your Mi Pad 4

Download the Android 16 LineageOS 23 ROM zip and your preferred GApps package from the download section above. Connect your Mi Pad 4 to your computer via USB and transfer both .zip files to the device’s internal storage root folder or SD Card. Remember the file location — you’ll need to find these files in TWRP later.

Transfer Android 16 LineageOS 23 ROM and GApps zip files to Mi Pad 4 internal storage via USB
3

restart_alt Boot Mi Pad 4 into TWRP Recovery Mode

Disconnect the USB cable and power off your Mi Pad 4 completely. Once the device is off, press and hold the Power button + Volume Up button simultaneously until you see the TWRP logo appear on screen. Release both buttons when TWRP loads. If prompted, swipe to allow modifications.

Boot Mi Pad 4 into TWRP Recovery Mode using Power and Volume Up buttons
4

backup Create a Nandroid Backup of Your Current ROM

This step is critical for safety. In TWRP, tap Backup and create a complete Nandroid Backup. This creates a bit-for-bit copy of your entire current system — including the ROM, apps, data, and settings. If anything goes wrong during the Android 16 installation, or if you want to return to your previous ROM, you can restore this backup in minutes.

Detailed Nandroid Backup guide →

Create a full Nandroid Backup in TWRP before installing Android 16 on Mi Pad 4
5

delete_sweep Perform a Factory Reset Using Advanced Wipe

Now perform a thorough Factory Reset to prepare your Mi Pad 4 for the Android 16 ROM. In TWRP, navigate to Wipe → Advanced Wipe. Check the boxes for Cache, Dalvik Cache, System, and Data partitions. Then Swipe to Wipe. This completely clears the old system files, user data, and cache — preventing conflicts with the new Android 16 ROM.

TWRP Advanced Wipe selecting Cache, Dalvik, System, and Data partitions on Mi Pad 4
6

home Return to the TWRP Main Menu

After the wipe completes successfully, navigate back to the TWRP Main Menu by tapping the back arrow or pressing the home/center navigation button on your Mi Pad 4. You should see the main TWRP screen with options like Install, Wipe, Backup, Restore, etc.

Navigate back to TWRP Main Menu on Mi Pad 4 after factory reset
7

system_update Flash the Android 16 ROM (LineageOS 23)

This is the main step. From the TWRP Main Menu, tap Install. Navigate to the folder where you saved the LineageOS 23 (Android 16) ROM zip file. Tap the file to select it, then Swipe to Confirm Flash. The flashing process takes 2–5 minutes — do not touch anything or power off your Mi Pad 4 until it completes. You’ll see “Successful” when done.

Flash Android 16 LineageOS 23 custom ROM zip file via TWRP Install on Mi Pad 4
8

apps Flash the Google Apps (GApps) Package

Immediately after the ROM flash completes, do not reboot yet. Instead, tap “Install” again (or use the back button), navigate to your GApps zip file, and flash it the same way. This installs the Google Play Store, Gmail, Google Maps, YouTube, and other essential Google services on your Mi Pad 4. Without GApps, you won’t have access to Google services or the Play Store.

Flash GApps package via TWRP immediately after Android 16 ROM on Mi Pad 4
9

cached Wipe Cache and Dalvik Cache

After the GApps flash completes, you’ll see a “Wipe cache/dalvik” button at the bottom left of the TWRP screen. Tap it and Swipe to Wipe. This clears any residual cached data and ensures a clean, error-free first boot of Android 16 on your Mi Pad 4. Skipping this step can cause boot loops or app crashes.

Wipe cache and dalvik cache in TWRP after flashing Android 16 ROM and GApps on Mi Pad 4
10

restart_alt Reboot Your Mi Pad 4 into Android 16

After the cache wipe completes, Press the Home Button, Click Reboot button from the main menu, Tap on System and Swipe to Reboot. Your Mi Pad 4 will now boot into Android 16 (LineageOS 23) for the first time! Important: The first boot typically takes 5–10 minutes as the system optimizes all applications. The screen may appear stuck on the boot animation — this is completely normal. Do not force restart during this process.

Reboot Mi Pad 4 into Android 16 LineageOS 23 - first boot after successful custom ROM installation
celebration

Android 16 Successfully Installed on Your Mi Pad 4!

Congratulations! You’ve successfully installed Android 16 (LineageOS 23) on your Mi Pad 4. Enjoy the latest Android features, improved performance, enhanced security, and a clean stock Android experience on your refreshed device!

verified

What’s Working & Not Working on Android 16 (Mi Pad 4)

Based on the XDA Forum thread and community reports, here’s the current status of features on the LineageOS 23 (Android 16) ROM for the Mi Pad 4. Note: This may vary between builds, so always check the latest forum post.

check_circle Working

  • ✅ Phone calls & SMS
  • ✅ Wi-Fi & Hotspot
  • ✅ Mobile data (4G LTE)
  • ✅ Bluetooth & audio
  • ✅ Camera (photo & video)
  • ✅ GPS & location
  • ✅ Fingerprint sensor
  • ✅ NFC

cancel Known Issues

  • ⚠️ Minor camera quirks in some modes
  • ⚠️ Some hardware features may vary by build

Always check the XDA Forum thread for the most up-to-date bug list for your specific build version.

build

Troubleshooting Common Issues

🔄 Stuck on Boot Animation (Bootloop)

If your Mi Pad 4 is stuck on the boot animation for more than 15 minutes, it may be bootlooping. Reboot into TWRP (Power + Vol Up), perform a full wipe (System, Data, Cache, Dalvik), and re-flash the ROM and GApps. Make sure you’re using compatible GApps for Android 16 arm64.

❌ “Error 7” or “Zip Verification Failed”

This usually means you’re flashing a ROM not built for your device. Double-check that the ROM zip is specifically for the Mi Pad 4. Also ensure your TWRP version is up-to-date and compatible with Android 16 ROMs.

📱 No Mobile Data or Signal After Installation

You may need to flash the correct firmware (baseband/modem) before installing the ROM. Check the XDA Forum thread for the recommended firmware version for your build of LineageOS 23.

🔙 How to Restore Back to Stock ROM

If you want to go back to the stock ROM: (1) restore your Nandroid Backup via TWRP → Restore, or (2) download the official stock ROM from the manufacturer and flash it using the appropriate flash tool on your PC. This will completely restore your Mi Pad 4 to factory stock condition.

Frequently Asked Questions — Android 16 on Mi Pad 4

Here are answers to the most commonly asked questions about installing and using Android 16 (LineageOS 23) on the Mi Pad 4:

Is the Android 16 ROM for Mi Pad 4 stable enough for daily use?

The LineageOS 23 (Android 16) ROM for the Mi Pad 4 is an unofficial build. Core features — including phone calls, Wi-Fi, mobile data, camera, Bluetooth, GPS, and the fingerprint scanner — work well in most builds. Some minor bugs may exist depending on the build version. We recommend checking the XDA Forum thread for the latest known issues before installing it as your daily driver.

Will installing a custom ROM void my Mi Pad 4 warranty?

Yes, unlocking the bootloader and installing a custom ROM voids the manufacturer warranty. However, since the Mi Pad 4 was released in September 2019, virtually all units are well past their warranty period, so this shouldn’t be a concern for most users.

Can I go back to stock ROM after installing Android 16 on my Mi Pad 4?

Absolutely. You have two options: (1) Restore your Nandroid Backup through TWRP Recovery to return to your exact previous ROM state, or (2) Download the official stock ROM from the manufacturer’s website and flash it using the appropriate flash tool to perform a clean restore to stock firmware.

Which GApps package should I use with Android 16 on Mi Pad 4?

You can choose from four popular options: LiteGApps (recommended for minimal footprint), NikGApps (offers granular control over which Google apps to install), MindTheGApps (balanced package), or BiTGapps (lightweight alternative). All must be the ARM64 variant for Android 16 (API 36). Read our complete GApps compatibility guide to choose the best option for your needs.

Do I need an unlocked bootloader to install Android 16 on Mi Pad 4?

Yes, an unlocked bootloader is a mandatory prerequisite. Without it, you cannot install TWRP Recovery or flash any custom ROM. Use the manufacturer’s official unlock tool to request a bootloader unlock. The process typically involves a waiting period before the unlock is approved.

Does the Android 16 ROM support the Mi Pad 4’s fingerprint scanner?

Yes, in most LineageOS 23 builds for the Mi Pad 4, the fingerprint scanner works correctly. However, functionality can occasionally vary between different build versions. If the fingerprint scanner isn’t working after installation, try updating to the latest build or check the XDA Forum for any required patches.

How do I update the Android 16 ROM on my Mi Pad 4 after installation?

To update to a newer build of LineageOS 23: Download the latest ROM zip from the LineageOS download page, transfer it to your device, reboot into TWRP, and flash the new ROM zip over the existing installation (this is called a “dirty flash”). Then wipe cache/dalvik and reboot. A full data wipe is usually not needed for minor updates, but always check the XDA thread for update-specific instructions.

Is the Xiaomi Mi CC9 the same as the Mi Pad 4 for custom ROM installation?

Yes, the Xiaomi Mi CC9 and Mi Pad 4 are the same hardware device sold under different names in different regions. The Mi CC9 was the Chinese variant, while the Mi Pad 4 was the global/international variant. Both use the exact same ROM, TWRP recovery, firmware, and kernel files. You can follow this same guide for either device.

chat

Have questions or ran into issues while installing Android 16 on your Mi Pad 4? Drop a comment below and we’ll help you out! You can also get support from the XDA Forum community where the ROM developer and experienced users actively respond to questions.