As far as the cameras are concerned, the Redmi K40 on the rear packs a triple camera setup featuring a 48-megapixel primary camera with an f/1.79 aperture; an 8-megapixel camera, and a 5-megapixel camera. The rear camera setup has autofocus. It has a single front camera setup for selfies, featuring a 20-megapixel sensor.
Important Notes!
This ROM will only work on this device, Don’t try this on any other device.
Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process.[the_ad id=”6712″]
Requirements!
You must have TWRP Recovery Installed on your device. (Learn here: How to install)
XDA Development Forum: Here!
(☝Check this XDA Forum for Exact Details on how to Install this ROM also check if there’s a patch need to be flash)
▼DOWNLOAD FILES
Download AOSP ROM
Download Recovery Image from Google Drive
Check out which G-App is compatible with your device from Here!
Installation instructions:
Download the latest build , GApps
Reboot to recovery
Wipe system , vendor , data , cache, internal storage.
Flash the latest build & GApps
Reboot
Instructions to Install
1. First Download & Install a Custom Recovery on your device (TWRP is recommended), If you already have installed then skip this step.
[the_ad id=”193″]
2. Download ROM & Gapps .zip file and save it on your device’s internal storage or SD Card.
[the_ad id=”6714″]
3. Now Boot your device into TWRP Recovery Mode. (if you don’t know how to boot your device into twrp recovery then you can search it on Google)
[the_ad id=”193″]
4. Now in TWRP create a Nandroid Backup of your device for safer side. If anything goes wrong, you can restore back to your older ROM. (How to Take Nandroid Backup)
[the_ad id=”6714″]
5. Now do a Factory Reset of your device, Goto Wipe > Advanced Wipe > Select Cache, Dalvik Cache, System, and Data. Then Swipe to Wipe.
[the_ad id=”193″]
6. Now go back to TWRP Main Menu by pressing the Center navigation button.
[the_ad id=”6714″]
7. Now Select Install, Locate the ROM zip file and Swipe to Confirm Flash.
[the_ad id=”193″]
8. After the flashing completes, Flash the Gapps in the manner.
[the_ad id=”6714″]
9. After Gapps flashing completes, Select Wipe cache/dalvik from the bottom left side of the screen, & Swipe to Wipe.
[the_ad id=”193″]
10. After wipe completes, Click on Reboot System.
[the_ad id=”6714″]
That’s it Now you have successfully installed the latest Android on your device, the first boot will take some time so please don’t panic!
If you have any questions regarding the ROM or the installation process, use the comments section below to reach us or contact to XDA forum members from the link above.