How to factory reset ZTE Axon 11 SE 5G? How to wipe all data in ZTE Axon 11 SE 5G? How to bypass screen lock in ZTE Axon 11 SE 5G? How to restore defaults in ZTE Axon 11 SE 5G?
The following tutorial shows all method of master reset ZTE Axon 11 SE 5G. Check out how to accomplish hard reset by hardware keys and Android 10 settings. As a result your ZTE Axon 11 SE 5G will be as new and your MediaTek Dimensity 800 (MT6973V) core will run faster.
1. Firstly, turn off the smartphone by pressing the Power key for a few seconds.
2. After that hold down Volume Down and Power buttons for a couple of seconds.
3. Release the Power key if the ZTE logo appears.
4. Let go of Volume Down when Recovery Mode pops up.
5. Use Volume buttons to select “wipe data/factory reset” and accept it with the Power key.
6. Then you should choose “yes” from the menu and press the Power button.
7. At the end select “reboot system now” with the Power key.
8. Great! You are performed hard reset operation.
ZTE Axon 11 SE Specification:
ZTE Axon 11 SE smartphone was launched on 1st June 2020. The phone comes with a 6.53-inch touchscreen display with a resolution of 1080×2340 pixels. ZTE Axon 11 SE is powered by an octa-core MediaTek Dimensity 800 processor. It comes with 6GB of RAM. The ZTE Axon 11 SE runs Android 10 and is powered by a 4000mAh battery.
As far as the cameras are concerned, the ZTE Axon 11 SE on the rear packs a 48-megapixel primary camera with an f/f/1.79 aperture; a second 8-megapixel camera with an f/f/2.2 aperture; a third 2-megapixel camera with an f/f/2.4 aperture and a fourth 2-megapixel camera with an f/f/2.4 aperture. It sports a 16-megapixel camera on the front for selfies, with an f/f/2.0 aperture.
The ZTE Axon 11 SE runs MiFavor 10.1 based on Android 10 and packs 128GB of inbuilt storage. The ZTE Axon 11 SE measures 162.70 x 76.30 x 8.80mm (height x width x thickness) .
Connectivity options on the ZTE Axon 11 SE include Wi-Fi and GPS with active 4G on both SIM cards. Sensors on the phone include fingerprint sensor.