The phone comes with a 60 Hz refresh rate 6.20-inch touchscreen display offering a resolution of 720×1600 pixels at a pixel density of 269 pixels per inch (ppi) and an aspect ratio of 20:9. Tecno Spark 8 is powered by an octa-core MediaTek Helio A25 processor. It comes with 2GB, 3GB, 4GB of RAM. The Tecno Spark 8 runs Android 11 (Go edition) and is powered by a 5000mAh battery.
What is Google Camera (Gcam)
As far as the cameras are concerned, the Tecno Spark 8 on the rear packs a 16-megapixel (f/1.8) + AI Lens camera with an f/1.8) + AI Lens (f/2.0 aperture. The rear camera setup has autofocus. It has a single front camera setup for selfies, featuring an 8-megapixel sensor with an f/2.0 aperture.
Important Notes!
So, If you installed the APK and when you try to open it, it is not working? No problem, we have got you covered.
1. Check Camera2API support: Google Camera needs Camera2API support on your device to work properly. How to check if your phone has Camer2API support? Follow this guide: How To Check Camera2 API Support on Android? Find Out.
▼Download Google Camera (GCam)▼
(Please Try every APK file linked below)
Gcam_build_mod.apk: Download
▼Video Instruction▼
(Please ignore config file if its not available in the download section)
Steps to Install Google Camera
1. Download the GCam APK file on your device from the link above.
2. Tap on the APK file > It may ask you to enable the Unknown Sources option at first.
3. Go to the device Settings > Security or Privacy > Additional Settings.
4. Once the Unknown Sources enabled, tap on the Install button.
5. Now, open the Google Camera app and allow some of the permissions.
That’s it. You’re done.
So, there you have it from my side in this post. I hope you liked this post and were successful in installing the GCam or the Google Camera port for your smartphones. Let us know in the comments which features were far better with the GCam as compared to the stock camera application.